Well Drilling Bearing Tool Steel Ball S2 Rockbit Balls

• Customization: Available
• Contact Angle: 60°
• Aligning: Aligning Bearing
• Model NO.: 2mm-200mm
• Rows Number: Multiple
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Package: Steel Drum,Carton
• Transport Package: Carton+Plywood Cases
• Specification: 2mm-200mm
• Trademark: NO
• Origin: Made in China
• HS Code: 84829100
• Production Capacity: 10, 000kg Per Month

Product Description

Product introduction

Rock Bit S-2 Tool Steel balls are designed to work well in very extreme conditions that are common when drilling deep into the ground. The balls provide the strength and toughness that is required to withstand heavy force and the abrasion of pulverized rock. These balls also have unusually good wear characteristics due to the materials hardening capabilities.

Rock Bit S-2 Tool Steel balls are manufactured for bearings that are used in well drilling, oil field drilling and equipment and offshore drilling platforms.

Material: Rock Bit S-2 Tool Steel

Diameter:2mm - 200mm (Professional production line 4.763mm 3/16",7.938mm 5/16" ,9.525mm 3/8"and so on )

Grade: G20 / G28 / G40 / G100 / G200 / G500 / G1000 / G2000 according to ISO, DIN, or AFBMA standard

Chemical composition

All products


Precision table
 

 

A.F.B.M.A. STANDARDS(U.S.A)
AFBMA GRADES	ROUNDNESS		LOT DIAMETER VARIATION		BASIC DIAMETER TOLERANCE		MAX. INCREMENTS		SURFACE RCUGHNESS
	INCHES	μm	INCHES	μm	INCHES	μm	INCHES	μm	INCHES	μm
3	.000003	0,08	.000005	0,13	±.00003	0,76	.000010	0,25	.5	0,012
5	.000005	0,13	.000010	0,25	±.00005	0,27	.000010	0,25	.8	0,020
10	.000010	0,25	.000020	0,51	±.0001	2,54	.000010	0,25	1.0	0,025
16	.000016	0,38	.000032	0,76	±.0001	2,54	.000010	0,25	1.0	0,025
24	.000024	0,63	.000048	1,27	±.0001	2,54	.000010	0,25	2.0	0,050
48	.000048	1,27	.000096	2,54	±.0002	5,08	.000050	0,12	3.0	0,076
100	.0001	2,50	.0002	5,08	±.0005	12,70	.0001	2,54	5.0	0,120
200	.0002	5,08	.0004	10,20	±.001	25,40	.0002	5,08	8.0	0,203
500	.0005	12,70	.001	25,40	±.002	50,80	.0005	12,70	-	-
1000	.001	25,40	.002	50,80	±.005	127,00	.001	25,40	-	-

 

DIN5401(GERMAN STANDARDS)
DIN 5401 GRADE	ROUNDNESS μm	LOT DIAMETER VARIATION μm	BASIC DIAMETER TOLERANCE μm	GAUGE INTERVAL μm
I	0,25	0,50	±10,25	0,50
II	0,50	1,00	±10,50	1,00
III	1,00	2,00	±11,00	2,00
IV	2,00	4,00	±14,00	4,00
V	25,00	50,00	±75,00	50,00
VI	-	400,00	±200,00	-

 

APPROXIMATE EQUIVALENT GRADES BETWEEN ISO 3290,AFBMA,DIN
GRADES	AAAA	AAA	AA	A	B	C	∅mm
ISO3290	5	10	16	28	40	100	up to 3 included
	10	16	28	40	100		from 3 to 6 included
	10	16	28	40	100	200	from 6 to 10 included
	16	20	28	40	100	200	from 10 to 20 included
		28	40	100	200		from 20 to 30 included
		40		100	200		from 30 to 50 included
		40	100	100	200		over 50
AFBMA	5	10	16	24	48	100	up to 3 included
	10	16	24	48	100	100	from 3 to 6 included
	10	16	24	48	100	200	from 6 to 10 included
	16	16	24	48	100	200	from 10 to 20 included
		24	48	100	200	300	from 20 to 30 included
		48	48	100	200	300	from 30 to 50 included
		48	100	100	200	300	over 50
DIN	class -	class I	class II	class III	class IV	-	up to 3 included
	-	I	II	III	IV	-	from 3 to 6 included
	I	II	III	-	IV	-	from 6 to 10 included
	-	III	III	IV	-	-	from 10 to 20 included
	II	-	III	IV	-	-	from 20 to 30 included
	-	-	III	IV	-	-	from 30 to 50 included
	-	-	III	IV	-	-	over 50

JIANGSU WALLONG-HSIN MACHINERY ENGINEERING CORPORATION LTD has created a complete range in order to offer advanced solutions and an outstanding technical services. The application range includes:

*High quality Ball Bearings components
*Linear systems,Ball bearing slides
*Free Wheels and casters,rail wheels
*Ball transfer units,air cargo and conveyor
*Stainless steel and tungsten carbide ball point pens
*Various types of valves for liquids and gases,etc.
*CV Joints,hydraulic motors and oilers
*Safety belt balls,car seat guides balls
*motor bikes and bicycles ball parts
*Furniture fitting,drawer slide balls
*Coconut grinding balls, coffee milling balls
*Cosmetic balls,nail polish balls
*Pump balls